Home   |   Products   |    News   |   Download    |    Contact    |    Support   |   Brochure

Thai / English

Networking I Wireless LAN I USB  I Firewire  I Net PC-Thin Client I Printer-server I Router I Multimedia

Products

ISO9002



 

 INS08G1

24 port Gigabit Copper Ethernet SwitchThe INS08G1 is a high performance/ low cost, eight 10/100Mbps Full/Half Ethernet Bridge and one 1000/100/10 Gigabit port switch. The INS08G1 is intended for applications to Standalone Bridge for low cost SOHO market.

INS08G1 supports backpressure in half-duplex mode and 802.3x flow control in full duplex mode while buffer is full without dropping packets. An intelligent address recognition algorithm makes INS08G1 to recognize up to 4096 different MAC addresses and enables filtering and forwarding at full wire speed.

The built-in 2Mbit RAM used for packet buffer and address learning table, is divided into 512bytes/ block to achieve the optimized memory utilization through complicated link list on packets with various lengths.

INS08G1 also supports port-base, 802.lp, and IP TOS field checking for priority. Each output port supports four queues in the way of fixed 8-4-2-l fairness queuing to fit the bandwidth demand on various types of packet such as Voice, Video and data.802.1Q, Tag/1JIltag,and up to16 group of VLAN also is supported and could be performed on two connected INS08G1 for 16port switch segment. Port 7,8 could be set as one MAC-base trunking group for uplinking a server or its counterpart through 400Mbps bandwidth (Optional).
 

  • 8 10/100M auto-detect Halt/Full duplex switch ports and one 1000(Fully) 100/10M Half/Full duplex port.

  • Built-in 2M bits SRAM

  • Up to 4096MAC addresses table /hashing algorithm on address learning

  • Four queues with fixed 8-4-2-l fairness queuing per port

  • Port-base, 802.lp TOS and 802.1Q VLAN priority.

  • Supports store & forward architecture and performs forwarding and filtering at non-blocking full wire speed

  • Buffer allocation with 512bytes each

  • Supports aging function and 802.3x now control for full duplex and backpressure function for half/duplex ︽peration

  • Supports packet length up to 1522bytes

  • Supports Congestion Flow Control

  • Provides 3 LEDs to indicate the packets traffic if transport-layer port number matched on the eeprom setting.

  • Supports broadcast storm filter

  • Supports up to 16 VLAN group.(Optional)

  • Capable of one trunking group on Port 7 and 8 to link another device (Optional)


 
Access Method: CSMA/CD
Network Interface: IEEE 802.3 10Base-T IEEE 802.3u 100Base-Tx IEEE 802.3z/ab 1000BASE-T
Cable: 10Base-T:Category 3,4 or 5 UTP/STP cable
100Base-Tx:Category 5 UTP/STP cable
1000Base-T:Category 5 UTP/STP cable
Date Rate: 10Mbps/20Mbps(Full-duplex) 100Mbps/200Mbps (Full-duplex) 1000Mbps/2000Mbps (Full-duplex)
LED indicators: 1000M, Diag, Power LED, Individual (full duplex and collision), (Link/activity), (10/100M)
Dimension: 200mm(L) x 107mm(W) x 26mm(H)
Temperature: Operating: 0℃ to 50℃; Storage: -20℃ to 70℃
Humidity: Operating: 10% to 90% RH; Storage: 5% to 90% RH
Input Power Requirement: 3.3 VDC, 3000mA Adapter
Registrations: FCC, CE
 

Copyright(c)2003 by infosmart.spygy.com .All right reserved

design by asiagenial.com