INPS300U

ARM7-based 2 USB & 1 Parallel 10/100Mbps Print Server
 

• Interfaces USB: 2 USB 1.1-compliant ports.

• Each port supports 1.5Mbps (low speed) and 12Mbps (full speed) data transmission rate.

• ach port automatically detects the make and model of the USB printer.

• Parallel: 1 DB-25-pin Centronics port, supporting Bi-Directional communication

• LAN: Compliant with IEEE 802.3/803.2u standard, 10/100Mbps, auto-sensing, auto-MDI-X (auto cross-over), RJ-45 (UTP) connector .

• Key Software Specification Network Operating System Support Windows 95/98/98SE/Me, Windows NT 4.0/2000/XP, Mac OS 8.1 or higher, UNIX/Linux, NetWare (Bindery/NDS

• Network Protocol Support TCP/IP, IPX, NetBEUI, AppleTalk, LPR, SMB Internet Printing Protocol (IPP) Support, Windows Print Monitor Technology ,DHCP (client) Support ,Management Web Interface, Windows-based Setup Program, Telnet Software Upgradeable (supports TFTP & Web browser) SNMP & HP Web JetAdmin Support

• Hardware Specification CPU High-performance 32-bit RISC micro processor Flash 512Kbytes (extendable to 1Mbytes) System Memory 2Mbytes (extendable to 4Mbytes) USB USB 1.1 Standard Compliant Host Controller LAN 10/100Mbps, Auto-sensing, Auto MDI-X (Auto cross-over)

• Dimensions (L x W x H) 169 x 115 x 34.5 mm

• Power Supply 5V, 2A EMI

• Certifications CE / FCC Class A

• Rear Panel 25-pin Parallel Port USB Port #1 USB Port #2 10/100Mbps LEDs Power Reset LAN PWR LAN