|
Standards |
.IEEE 802.3: 10BASE-T |
.IEEE802.3ab: 1000BASE-T |
|
.IEEE 802.3u: 100BASE-TX |
.IEEE 802.3x: Flow-Control for Full-Duplex operation |
|
Ports |
.24 ports
10/100MbpsTX |
| .1 or 2
port(s) 100Mbps FX (Optional) |
| .1 or 2
port(s) Giga Module (Optional) |
|
Media Support |
.10BASE-T: Category 3, 4 or 5 TP |
|
.100BASE-TX/1000BASE-T: Category 5 TP |
|
Bandwidth |
.10BASE-T:
20/10Mbps |
| .100BASE-TX:
200/100Mbps |
| .1000BASE-T:
2000Mbps |
|
Forwarding/Filtering Rate |
.1488000 packets/second per port @ 1000Mbps, maximum |
|
.148800 packets/second per port @ 100Mbps, maximum |
|
.14880 packets/second per port @ 10Mbps, maximum |
| Latency |
.11 msec
@100Mbps, minimum.75 msec @ 10Mbps, minimum |
|
MAC Addresses |
.32K entries maximum, Self-Learning |
| IP Address
|
.64K entries
maximum, Self-Learning |
|
Buffer Memory |
.4 M byte |
|
Configuration Interface |
.Console
RS-232 DCE 19200bps (default) |
|
Duplex Modes |
.TP ports provide 100/10Mbps Full/Half-Duplex
Auto-Negotiation function |
|
.Fiber ports set to Half or Forced Full-Duplex mode via
console port |
|
LED Indicators |
For port 1
to 24: |
For port
25,26 (Gigabit Module): |
| .One (1) for
PWR |
.One (1) per
port for RXACT |
| .One (1) per
port for FDX / COL |
.One (1) per
port for TXACT |
| .One (1) per
port for LINK / ACT (100M or 10M) |
.One (1) per
port for LINK |
|
Power Supply |
.Internal full range Auto-Switching.Input voltage: 100 ~
240 +/-10%V AC/ 50 ~ 60 Hz |
| Power
Consumption |
.52.9 watt
maximum |
|
Environment |
.Operating Temperature: 0° ~ 45°C (32° ~ 113°F) |
|
.Storage Temperature: -20° ~ 70°C (-4° ~ 158°F) |
|
.Humidity: 10% ~ 90% Non-Condensing |
| Dimensions
|
.442 x 255 x
44 mm (17.40 x 10 x 1.73 inches) |