IN320

The special feature of this product is that it has a RJ-45 connector on CardBus card, thus eliminate the necessity of a dongle ( Dongle-Less). This product is a high speed CardBus Ethernet PC Card. It uses REALTEK 8139C(L) 3.3V single chip 10/100 Mbps Ethernet IC. The card supports 10Mbps and 100Mbps dual speed and automatic speed detection and connection. With its 32-bit high speed bus, this card provides high bandwidth networking capability to notebook PCs.
 

• PC Card standard 68-pin 32-bit Card Bus Interface

• RJ-45 connector on CardBus card, no need of a dongle

• 5.0mm Type II Credit Card size

• Complies with IEEE 802.3 10Base-T and 802.3u 100Base-TX

• 10/100Mbps auto-sensing capability

• Full/Half-duplex auto-negotiation supported for both 10Base-T and 100Base-TX

• "Hot swap" card insertion and removal

• 3.3V low power consumption

• Support all popular Network Operating Systems

• Diagnostics LED indicators LNK, 100M, Act

• Switchless design and software-configurable card setting

• Low power consumption

• Support Windows 95,98,NT and Windows 2000,ME/XP, Mac OS, Linux

• Interface:
  68 pin connector for attachment to PC's PCMCIA/CardBus slot

• LAN Interface:
  RJ-45 female connector on board for network interface

• PC Card standard:
  Credit-card size, type II, no need of a dongle (dongle-less)Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX standard

• Speed Sense and Support:
  Nway Automatically negotiates 10 or 100Mbps connection rate,
  Full duplex or Half duplex.

• Cable requirement:
  10Base-T: CAT3 / CAT5 UTP up to 100M/328ft
  100Base-TX: CAT5 UTP up to 100M/328ft

• Dimension:
  110 x 54 x 12.5 mm (L x W x H)

• Certification:
  FCC class B, CE(CISPR22 class B), VCCI Class 2

• Environmental Operating Ranges
  Operating : Temperature : 0 ~ 55°C Humidity: 10 ~ 90%Storage: Temperature :- 20 ~ 90°C Humidity: 10 ~ 90%

• Power Consumption:
  -Operational average: 93.4 mA / 3.3V

• LED Indication:
  "10" LED: indicates 10Mbps Ethernet is connected
  "100" LED: indicates 100Mbps Ethernet is connected
  "ACT" LED: indicates 10M or 100Mbps Ethernet is in active now.

• Drivers support:
  Windows95/ 98/ ME/NT4.0/ 2000/XP; Novell ODI; Mac OS; Linux; Packet Driver